制造技术：金属切削与机床（第2卷）（英文版·原书第2版） 下载 mobi epub pdf 电子书 2024

☆☆☆☆☆
简体网页||繁体网页

点击这里下载

类似图书 点击查看全场最低价

---

内容简介

《制造技术：金属切削与机床（第2卷）（英文版·原书第2版）》是一本适合于我国高校机械工程及自动化以及相关专业的优秀英文原版教材，同时也不失为一本专业的教学参考书。可用于相关专业的专业英语教学，并可供机械工程和制造工程领域的专业技术人员参考。
《制造技术：金属切削与机床（第2卷）（英文版·原书第2版） 》侧重机械制造的基本内容，包括涂层硬质合金、机械加工技术、通用测量设备和特种加工技术四大部分。
将原书中第14章“工艺规划”改写为“工装与夹具”
增加了介绍涂层硬质合金的内容。
加强了机床传动系统及作动器方面的内容。
改写了第11章“特种加工”的内容，增加了水切割等新工艺方法。
第15章对摩擦学方面的通用测量设备内容进行了更新。

作者简介

作者：(美国)拉奥(P N Rao)

目录

出版说明
序
Preface
1. Introduction
1.1 Introduction to Material Removal Processes
1.2 Variety of Machine Tools

2. Metal Cutting
Objectives
2.1 Introduction
2.2 Chip Formation
2.3 Shear Zone
2.4 Orthogonal Cutting
2.5 Shear Angle and Its Relevance
2.6 Cutting Tool Materials
2.7 Thermal Aspects
2.8 Tool Wear and Tool Life
2.9 Surface Finish
2.10 Cutting Fluids
2.11 Empirical and Analytical Determination of Cutting Forces
2.12 Economics
Summary
References
Review Questions
Problems

3. Machine Tools
Objectives
3.1 Introduction
3.2 Classification of Machine Tools
3.3 Generating and Forming
3.4 Methods of Generating Surfaces
3.5 Accuracy and Finish Achievable
3.6 Basic Elements of Machine Tools
3.7 Support Structures
3.8 Power Transmission
3.9 Actuation Systems
3.10 Guideways
3.11 General Work Holding Methods
Summary
References
Questions

4. Centre Lathe
Objectives
4.1 Introduction
4.2 Constructional Features of a Centre Lathe
4.3 Aids for Support and Location
4.4 Cutting Tools
4.5 Operations Performed in a Centre Lathe
4.6 Taper Turning Methods
4.7 Thread-cutting Methods
4.8 Special Attachments
4.9 Machining Time and Power Estimation
4.10 Typical Setups
Summary
References
Questions
Problems

5. Special-Purpose Lathes
Objectives
5.1 Limitations of a Centre Lathe
5.2 Capstan and Turret Lathes
5.3 Automatic Lathes
5.4 Tooling Layout and CAM Design for Automatic Lathes
Summary
Questions

6. Reciprocating Machine Tools
Objectives
6.1 Introduction
6.2 Shaper
6.3 Planing Machine
6.4 Slotter
Summary
Questions
Problems

7. Milling
Objectives
7.1 Introduction
7.2 Types of Milling Machines
7.3 Milling Cutters
7.4 Milling Operations
7.5 Dividing Head
7.6 Milling Mechanics
7.7 Milling Time and Power Estimation
7.8 Special Setups
Summary
Questions
Problems

8. Hole-Making Operations
Objectives
8.1 Introduction
8.2 Drilling
8.3 Reaming
8.4 Boring
8.5 Tapping
8.6 Other Hole-making Operations
Summary
Questions
Problems

9. Abrasive Processes
Objectives
9.1 Introduction
9.2 Grinding Wheel Designation and Selection
9.3 Types of Grinding Machines
9.4 Grinding Process
9.5 Grinding Process Parameters
9.6 Creep Feed Grinding
9.7 Honing
9.8 Lapping
9.9 Other Finishing Processes
Summary
Questions
Problems

10. Other Machine Tools
Objectives
10.1 Sawing
10.2 Broaching
10.3 Gear Cutting
Summary
Questions

11. Unconventional Machining Processes
Objectives
11.1 Need for Unconventional Processes
11.2 Electric Discharge Machining
11.3 Electro-chemical Machining
11.4 Ultrasonic Machining
11.5 Chemical Machining
11.6 Laser Beam Machining
11.7 Abrasive Water Jet Machining
Summary
References
Questions

12. Machine Tool Testing
Objectives
12.1 Introduction
12.2 Measuring Instruments Used for Testing
12.3 Test Procedures
12.4 Acceptance Tests
Summary

13. Designing for Machining
Objectives
13.1 Introduction
13.2 General Guidelines for Design for Machining
13.3 Design for Turning
13.4 Design for Hole Making Operations
Summary

14. Jigs and Fixtures
Objectives
14.1 Introduction
14.2 Functional Surfaces
14.3 Location Principles
14.4 Locating Devices
14.5 Clamping Devices
14.6 Jigs
14.7 Designing a Jig
14.8 Fixtures
Summary
Questions

15. Metrology
Objectives
15.1 Introduction
15.2 Tolerances, Limits and Fits
15.3 Linear Measurement
15.4 Angular Measurement
15.5 Thread Measurement
15.6 Surface Texture
15.7 Gauges and Gauge Design
Summary
Questions

16. Numerical Control of Machine Tools
Objectives
16.1 Introduction
16.2 Numerical Control
16.3 NC Machine Tools
16.4 Part Programming Fundamentals
16.5 Manual Part Programming Methods
16.6 Computer Aided Part Programming
Summary
Questions
Problems
Index
读者信息反馈表

精彩书摘

Types of cutting fluids There are three basic types of cutting fluids used in metal cutting. They are Water based emulsions Pure water is by far the best cutting fluid available because of its highest heat carrying capacity （high specific heat）. Besides this, it is cheap and easily available. Its low viscosity makes it flow at high rates through the cutting fluid system and penetrate the cutting zone. However, water corrodes the work material very quickly, particularly at high temperatures prevalent in the cutting zone as well as the machine tool parts on which it is likely to spill.
Hence, other materials are added to water to improve its wetting characteristics, rust inhibitors, and any other additives to improve lubrication characteristics. These are also called water soluble oils. The concentrated oil is normally diluted in water to any desired concentration, such as 30 : 1 to 80 : 1. Straight Mineral oils These are the pure mineral oils without any additives. Their main function is lubrication and rust prevention. These are chemically stable and lower in cost. However, their effectiveness as cutting fluids is limited and therefore would be used for light duty application only. Mineral oils with additives （Neat oils） This is by far the largest variety of cutting fluids available commercially. A number of additives have been developed, which when added to the mineral oils would produce the desirable characteristics for the different machining situations. Many difficult to machine situations would be helped by the use of these cutting fluids. These are generally termed as neat oils.
The additives generally improve the load carrying capacity as well as chemical activity. Fatty oils are generally used for adding the load carrying properties. Other class of additives termed as EP （Extreme Pressure） additives are used for more difficult to machine situations. These EP agents come into effect whenever minute highspots on the mating surfaces break through the oil film, and rub together to set up localised high temperature spots. This high temperature causes the EP additives to react with the adjacent metals, and create an anti-welding layer of solid lubricant, precisely where it is required. The layer is continuously broken by the severe rubbing action between the chip and the tool.
EP additives are basically chlorine or sulphur, or a combination of both of them. As a result, the anti- welding compounds formed in the cutting zone are iron chloride and iron sulphide, both of which have very low shear strengths.
……

前言/序言

　　由美国北依阿华大学（University of Northern lowa）工业技术系P N Rao教授所著的《制造技术第1卷铸造、成形和焊接》（Manufacturing Technology Volume 1 Foundry，Forming and Welding）和《制造技术第2卷金属切削和机床》（Manufacturing Technology Volume 2 Metal Cutting andMachine Tools）已经分别出版到第3版和第2版，它们已经被国外多所大学选为工程类本科学生学习制造技术的专业基础教科书。几年前，作为国外优秀原版教材，机械工业出版社引进出版了该书的前一个版本，国内部分高校已经采用它们作为“工程材料及成形技术”、“机械制造技术基础”或“制造工程基础（包括成形加工和切削加工）”等机械工程及自动化类专业核心课程的教材或主要教学参考书。该书的引进出版和教学应用，对于促进国内机械工程本科教学中更新教材、教学研究和双语教学等工作，产生了积极的重要作用。
　　以使用本教材的教师和学生的反馈信息为基础，最新出版的这两卷书对第1卷的主要内容进行了大幅度地修订，也对第2卷的部分内容进行了调整和补充，从而使全书内容能够尽可能地反映出制造工艺与装备技术的新进展，使各章节内容更加简明和紧凑，从而更加便于教师和学生使用。
　　第1卷修订后将原来的29章内容重新组织改写为12章，删去了以前章节中一些重复的内容；重新绘制了部分示意图，使之更加清晰和易于学生理解；增加了有关抗拉试验、激光热处理、快速原型等10余处内容，重写了钎焊的全部内容。第2卷修订后各章标题变化不大，只是将原书中第14章“工艺规划”整个一章改写为“工装与夹具”，但在具体内容上，也进行了较大的修改和补充。第2章增加了介绍涂层硬质合金的内容，第3章加强了机床传动系统及作动器方面的内容，改写了第11章“特种加工”的内容，增加了水切割等新工艺方法，第15章对摩擦学方面的通用测量设备内容进行了更新。此外，该书还别开生面地在正文之前增加了“图示预览（Visual Walkthrough）”，将该章主要内容组成，如教学目的、发展历史、图示范例、已解决的问题、小结、思考题和习题等，用图示和文字做了一个概要描述，这将帮助读者更好地利用该书各章节的内容。
　　通过以上修订、补充和改写，使新版本制造技术的内容更加系统完整，文字更加简洁易读，图例更加清晰明了。
　　本书不失为一套适用于我国高校机械工程及自动化以及相关专业的优秀英文原版教材和教学参考书，也适用于相关专业的专业英语教材，并可供机械工程和制造工程领域的专业技术人员学习、参考。
制造技术：金属切削与机床（第2卷）（英文版·原书第2版） 下载 mobi epub pdf txt 电子书 格式

评分☆☆☆☆☆

还可以

评分☆☆☆☆☆

这本书挺好的建议购买，尤其对于机械人来说。

评分☆☆☆☆☆

打折时买的，可以参考一下

评分☆☆☆☆☆

《制造技术：金属切削与机床（第2卷）（英文版·原书第2版） 》侧重机械制造的基本内容，包括涂层硬质合金、机械加工技术、通用测量设备和特种加工技术四大部分。

评分☆☆☆☆☆

加强了机床传动系统及作动器方面的内容。

评分☆☆☆☆☆

服务态度好送货速度一流

评分☆☆☆☆☆

将原书中第14章“工艺规划”改写为“工装与夹具”

评分☆☆☆☆☆

第15章对摩擦学方面的通用测量设备内容进行了更新。

评分☆☆☆☆☆

打折时买的，可以参考一下

类似图书 点击查看全场最低价